Environmental Chambers
Darwin Chambers Company Bench Top Insect rearing chamber 29.75""W x 23""D x 27.75""H
The IN011 is 11.6 cubic feet a benchtop insect rearing chamber. Temperature range is 12°C to 50°C. Optional humidity range ambient to 90 percent. Humidity and lighting options not included. Must be ordered separately. This unit comes with 2 stainless steel shelves. The chamber provides 304 series stainless steel interior and door liner, corrosion-resistant; also a heavy-gauge powder-coated, galvanized steel exterior. The 7 year warranty on cooling components and the ability of our chambers to maintain temperature even if the chamber suffers multiple failures is unmatched by any other refrigeration-based chamber. The ultrasonic humidification system provides excellent humidity control and avoids hot spots seen during chamber mapping of steam boiler equipped chambers. The IN Series chambers utilize less energy than comparable insect rearing chambers.
Percival Scientific Drosophila Incubator, DR36NLH6, 29.7 cu. ft., vertical IncuWhite LEDs, 6 tiers, pan-type hum., dehum. and advanced sensor, coated coils, 2-44° C ±0.5°, IntellusUltra controller
The DR36NLH6 incubator is designed with features for optimal rearing of Drosophila melanogaster. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. A phenolic coated coil prevents waste damage. Pan-type humidifier, dehumidifier and adv. sensor keep and tightly maintain optimal humidity. Six white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. Contact sales@percival-scientific.com for more options.
Percival Scientific SciBrite LED Chamber, LED36L2, 29.7 cu. ft., 2 tiers of 4-color LEDs including red, blue, white, and far red, 10-44° C ±0.5°, IntellusUltra controller, touchscreen interface
The LED36L2 SciBrite LED chamber is specifically designed for plant growth light quality studies and other experiments requiring specific wavelengths of light. Two tiers of SciBrite 4-color LEDs (consisting of red, blue, white and far red), each color independently dimmable by tier from 1-100% output in 1% increments with up to 1300 µmoles/m2/s irradiance @ 6". IntellusUltra control system with touchscreen interface. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Two white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Contact sales@percival-scientific.com for more options.
Percival Scientific Drosophila Incubator, DR41NLH3, 37.2 cu. ft., non-lighted, 6 tiers, pan-type hum., dehum. and standard sensor, coated coils, 2-44° C ±0.5°, IntellusUltra controller
The DR41NLH3 incubator is designed with features for optimal rearing of Drosophila melanogaster. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. A phenolic coated coil prevents waste damage. Pan-type humidifier and dehumidifier keep media from drying out and maintains optimal humidity. Six white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. Contact sales@percival-scientific.com for more options.
Percival Scientific Photostability Chamber, RX3000L, 9.6 cu. ft., 1 tier, 10-44° C ±0.5°, Intellus Ultra controller and touchscreen. Dimmable white and UV lighting with photometric sensor.
The RX3000L photostability chamber is designed to meet the ICH Q1B option for photostability exposure testing. IntellusUltra control system with touchscreen interface. Interior of highly reflective Specular aluminum, exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation. Stainless steel floor for corrosion resistance. One stainless steel wire shelf adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Percival Scientific Algae Growth Chamber, AL36L4H14, 29.7 cu. ft.,SciWhite LEDs, 4 tiers, 7-44° C ±0.5°, 7-44° C ±0.5°, IntellusUltra controller, touchscreen, standard additive ultrasonic humidifier
The AL36L4H14 algae chamber used for algae with higher light intensity, and short plants with moderate light intensity. SciWhite LEDs are dimmable between 10-100% output with up to 350 µmoles/m2/s light irradiance @ 6”. IntellusUltra controller, touchscreen. Standard additive ultrasonic humidifier. Interior/exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation, stainless-steel floor for corrosion resistance. Conditioned air circulates through rear wall plenum, travels horizontally across each shelf; then vertically upward to unit cooler. Four white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; also prolongs life of compressor, and eliminates risk of ice build up in coil. Contact sales@percival-scientific.com for more options.
Darwin Chambers Company INSECT CHAMBER 24 CUFT
The IN030 is a 23.9 cubic foot single door insect rearing chamber. Temp range is 18 to 60 deg C. Optional humidity range ambient to 90%. Humidity and lighting options not included. Must be ordered separately. This unit comes w/ 3 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Silver-colored, polyester-coated aluminum interior & stainless steel floor w/ coved corners. The 7 year warranty on cooling components & the ability of our chambers to maintain temp. even if the chamber suffers multiple failures is unmatched by any other refrigeration-based chamber. The ultrasonic humidification system provides excellent humidity control & avoids hot spots seen during chamber mapping of steam boiler equipped chambers. The IN Series chambers utilize less energy than comparable insect rearing chambers.
Darwin Chambers Company CHAMBER INSECT 30 CU. FOOT
The IN034 is 32.1 cubic feet a extra wide single door insect rearing chamber. Temperature range is 16°C to 50°C. Optional humidity range ambient to 90 percent. Humidity and lighting options not included. Must be ordered separately. This unit comes with 3 stainless steel shelves. The chamber provides 304 series stainless steel interior and door liner, corrosion-resistant; also a heavy-gauge powder-coated, galvanized steel exterior. The 7 year warranty on cooling components and the ability of our chambers to maintain temperature even if the chamber suffers multiple failures is unmatched by any other refrigeration-based chamber. The ultrasonic humidification system provides excellent humidity control and avoids hot spots seen during chamber mapping of steam boiler equipped chambers. The IN Series chambers utilize less energy than comparable insect rearing chambers.
Caron Products And Services Photostability Chamber, 11 cu. ft., Option 2, Temp & RH
Photostability Chamber, 11 cu. ft. Meets ICH Q1B, Option 2, requirements with Cool White and Near UV lamps. Temperature controlled from 10C to 35C and humidity controlled from 40% to 70% RH. Electrical: 208/230V, 60 Hz, 15A.
Darwin Chambers Company Single Door Environmental Chamber 21 cu. ft.
The KB030 is a 23.9 cubic feet single door environmental chamber. Temperature range is 2 to 50 degrees C. Humidity range ambient to 90 percent. This unit comes with 3 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Silver-colored, polyester-coated aluminum interior and stainless steel floor with coved corners. The KB series chambers feature hot gas by-pass technology which controls the temperature of the epoxy coated evaporator for greater uniformity. The ultrasonic humidification system provides excellent humidity control and avoids hot spots seen during chamber mapping of steam boiler equipped chambers.
Percival Scientific SciBrite LED Chamber, LED36L1H12, 29.7 cu. ft., 1 tier of 4-color LEDs, 10-44° C ±0.5°, IntellusUltra controller, touchscreen, advanced ultrasonic humidifier and dehumidifier
The LED36L1H12 SciBrite LED chamber is designed for plant growth light quality studies and other experiments requiring specific wavelengths of light. One tier of SciBrite 4-color LEDs (consisting of red, blue, white and far red), each color independently dimmable from 1-100% output with up to 1550 µmoles/m2/s irradiance @ 6". IntellusUltra control system with touchscreen interface. Ultrasonic humidifier, dehumidifier, advanced humidity sensor. Interior/exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor. One white epoxy coated steel wire shelf adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Contact sales@percival-scientific.com for more options.
Percival Scientific SciBrite LED Chamber, LED36L2H14, 29.7 cu. ft., 2 tiers of 4-color LEDs, 10-44° C ±0.5°, IntellusUltra controller, touchscreen, standard additive ultrasonic humidifier
The LED36L2H14 SciBrite LED chamber is designed for plant growth light quality studies and other experiments requiring specific wavelengths of light. Two tiers of SciBrite 4-color LEDs (consisting of red, blue, white and far red), each color independently dimmable by tier from 1-100% output with up to 1300 µmoles/m2/s irradiance @ 6". IntellusUltra control system with touchscreen interface. Ultrasonic humidifier and standard humidity sensor. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor. Two white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Contact sales@percival-scientific.com for more options.
Percival Scientific SciBriteLED Chamber, LED30L1C9, 9.6 cu. ft., 1 tier of 4-color LEDs including red, blue, white, and far red, 10-44° C ±0.5°, IntellusUltraConnect controller, touchscreen interface
The LED36L1C9 SciBrite LED chamber is specifically designed for plant growth light quality studies and other experiments requiring specific wavelengths of light. One tier of SciBrite 4-color LEDs (consisting of red, blue, white and far red), each color independently dimmable from 1-100% output in 1% increments with up to 1550 µmoles/m2/s irradiance @ 6". Upgraded IntellusUltraConnect controller with touchscreen interface. Remote connectivity. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. One epoxy coated steel wire shelf adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Contact sales@percival-scientific.com for more options.
Memmert Humidity Chamber HCP 50, 230Volt +18C to +90C, 20-95%RH- 40mm silicone entry port with stopper rear wall
Memmert Humidity Chamber HCP 50, 230Volt +18C to +90C, 20-95%RH- 40mm silicone entry port with stopper rear wall